Sensitivity: -225 to -550 nA/ppm at 1ppm O3
Sensitivity: -250 to -650 nA/ppm at 2ppm NO2
Response time: < 45s from zero to 1ppm O3
Range: 20 ppm O3/NO2 limit of performance warranty
Temperature range: -30 to 40 ℃
Pressure range: 80 to 120 kPa
Humidity range: 15 to 85 % rh
Microprocessor based with splash proof housing.
Large LCD built into adjustable "flip-up" cover. Simultaneous display pH and Temperature.
Rugged design for handheld or bench top use, neckstrap for "hands-free" operation.
•Measured Coatings: Non-magnetic coatings (e.g. paint, zinc) on steel;
Insulating coatings (e.g. paint, anodizing coatings) on no-ferrous metals
•Operating with MENU easily
•Two measuring mode: CONTINUE and SINGLE mode
•Two working mode: DIRECT and GROUP mode (4 groups)
* Humidity : 10 to 90 %RH.
* Temperature : 0 to 50.0 oC, oC/oF.
* Barometer ; 10 to 1100 hPa, mmHg, inHg.
* Show barometer, humidity and temperature value in the same LCD.
* Large LCD display, easy readout.
- High accuracy, resolution and stability. Sampling speed to 120Hz.
- Setup the difference between upper and limit , Indicator light and buzzer alarm automatically and Level signal output
- Display test direction (Pull “ + “, Push “ - “)
- Sections of liquid crystal display, green back-lit screen.
* Real time data recorder, save the data into the SD memory card and can be download to the
Excel, extra software is no need.
* Meter connects with 2, 5, 10, 20, 50, 100, 400 bar sensor, no calibration procedures are
necessary when change a new sensor .
* Bar, PSI, Kg/cm2, inch Hg, mm Hg, inch H2O, meter H2O, Atmosphere.
* Data hold, Memory (Max., Min.).
- High accuracy, High resolution and High sample rate
- Setting the upper and lower deviation value freely, sound alarm and automatically level signal output
- Test direction display (clockwise" + ", counterclockwise" - ")
- Liquid crystal display, green back-light panel
- Store 99 groups of test data, automatically calculating and storing the average of data, maximum and minimum