Carbon Monoxide (CO) Transmitter with Gas Concentration Measurement and Control Capabilities:
The HT82 model carbon monoxide detector, housed in a plastic enclosure, is designed for detecting CO leaks in safe environments. With a measurement range of 0 to 300 ppm, this detector offers high sensitivity, making it well-suited for CO leak detection. The HT82 features a 4–20 mA current output, a 0–10 V voltage output, two relay outputs, and a MODBUS/RTU-RS485 serial port. This device is suitable for measuring carbon monoxide concentrations. The price of the detector varies based on its specific features; furthermore, custom versions—including units designed for different concentration ranges—can be manufactured to meet specific customer requirements. Technical Specifications for the CO Gas Detector:
Measurement Range: 0–300 ppm
Resolution: 1 ppm
Measurement Accuracy: ±5%
Sensor Lifespan: Over 10 years in clean air
Sensor Type: Electrochemical Gas Sensor
Sensitivity to Other Gases: Not tested
Power Supply (Non-isolated): 24 VDC ±10%
Serial Port: MODBUS/RTU (RS-485) communication protocol; baud rate: 2400–57600 bps; parity: None, Odd, Even
Analog Output (10-bit): 4–20 mA current output and 0–10 V voltage output; response time: 100 ms
Relay Output: Two 5A relay outputs with Normally Open (NO) and Normally Closed (NC) contacts
Environmental Conditions: Operating temperature: -20°C to 50°C; humidity: 0% to 95%
Dimensions: 127 × 70 × 52 mm
Weight:
Parking Carbon Monoxide Sensor, Parking CO Control, Parking Carbon Monoxide Control System
The parking Carbon Monoxide (CO) transmitter is a solution for measuring and monitoring CO gas concentrations in indoor parking facilities and enclosed spaces. By accurately measuring CO levels and transmitting control signals, this device enables the management of ventilation systems and the control of parking facility exhaust fans. It is an ideal choice for smart ventilation systems and for enhancing safety within parking environments.
