Sort by
Display
per page
DC Voltage 200mV～600V
AC Voltage 200V～600V
DC Current 200μA～10A
Resistance 200Ω～2MΩ
*Multi Display conductivity with Temp. & real time stamped
*Auto or manual range measurement
*Collect data via RS232 by linking with PC
Measurement range: 0 ~ 1% VOL range optional
Measuring Range:0～5000 ppm
Accuracy:± 50ppm+3% reading value
Frequency range:31.5HZ ~ 8KHZ
Dynamic range:50dB
Accuracy:±1.4dB
Frequency range:31.5HZ ~ 8KHZ
Dynamic range:50dB
Accuracy:±1.4dB
Sound Level range:35 ~ 130dB
accurancy:±3.0dB
Sound Level range:35 ~ 130dB
accurancy:±3.0dB
PM2.5 range:0-999.9ug/m3
Resolution:0.1ug/m3
Accuracy:15ug/m3
Ammonia range:O-10Oppm
Resolution:O.1ppm
Basic error:Less than +5% F.S
HCHO range:0-7.5 mg/m^3
resolution:0.01mg/m^3
Accuracy of HCHO <+-5FS
Multigas Detector for LEL, CO, H2S, and O2
Multigas Detector for LEL, CO, H2S, and O2
Pressure range:-50...+ 50 Pa
Output signal:4-20mA
Temperature - NTC:-20 to +100 °C
Absolute Pressure:600 to 1150 hPa
Leakage range:0 to 10 l/h
Measurement Principle:NH3 gas
range:0~100ppm
Number: 9389 9009
Measurement Principle:SO2 gas
range:0~20ppm
Number: 9389 9007
Measurement range: 0-100ppm
Resolution: 1ppm
maximum error: <50ppm: + 5ppm
maximum error: >50ppm: 10%
Measurement Principle:CO2 gas
range:0~5%vol
Number:9389 9005
Widest range detecting gases 0 to 5,000 ppm
Unrivalled sensitivity detects down to ppb levels
Measures 480 selectable compounds
Wide assortment of tubes to detect 300 gases and vapours
Gas tested: HCHO in the air
Measuring range: 0~3mg/m3
Resolution: 0.01mg/m3
Measurement Principle:CL2 gas
range:0~10ppm
Number: 9389 9008
H2S: 0 to 100 ppm
CO: 0 to 300 ppm
SO2: 0 to 50 ppm
O2: 0 to 25%
Measurement Principle:CO
range:0~ 1000ppm
Number: 9389 9004
Measurement Principle:H2S gas
H2S range:0-100ppm
Temperature H2S:-40 to +50°C
Measurement Principle:H2S gas
H2S range:0-100ppm
Temperature H2S:-40 to +50°C
H2S: 0 to 100 ppm
CO: 0 to 300 ppm
SO2: 0 to 50 ppm
O2: 0 to 25%
Oxygen range:0-25% by vol
Carbon Monoxide:0-500 PPM
Hydrogen Sulfide:0-100 PPM
Measurement Principle:H2S gas
range:0~ 100ppm
Number:9389 9006
H2S: 0 to 100 ppm
CO: 0 to 300 ppm
SO2: 0 to 50 ppm
O2: 0 to 25%
Mount sensor up to 100 ft. from transmitter
Mount sensor up to 100 ft. from transmitter
Choice of toxic, oxygen or flammable sensors
Detection Principle SF6: NIC
Range 0 – 2000 ppm SF6
Resolution 500 ppm SF6 / 10 ppm
Detection Principle SF6: NIC
Ultra high sensitivity with a 1 x 10-8 ml/sec
H2S: 0 to 100 ppm
CO: 0 to 300 ppm
SO2: 0 to 50 ppm
O2: 0 to 25%
Sensor:Photoionisation detector
Sensor:Photoionisation detector
Detects VOCs from 0 up to 20,000 ppm
Accuracy:± 5 % display reading ± 1 digit
Detects VOCs from 0 up to 5,000 ppm
Accuracy:± 5 % display reading ± 1 digit
Range 0 to 10 pp, 0 to 100, 0 to 1000 ppm
Measurement Principle:O2 gas
range:0~%30Vol
Number:9389 9003
Minimum Sensitivity PPM Model
Maximum Sensitivity PPB Model
detection of total aromatic compounds (TACs)
Unrivalled sensitivity detects down to ppb levels
Widest range detects gases 0 – 5,000 ppm
CO2, CH4: Infrared
O2, CO, H2S: Electrochemical
VOC: PID
Measurement Principle
Catalytic combustion:flammable gases
range:0~ 100LEL
Number: 9389 9001
Flammable, toxic and Oxygen versions available
Flammable 0-100% LEL
Oxygen 0-25% VOL
Measurement Principle
Electrochemical:oxygen and toxic gases
Catalytic combustion:flammable gases
Infrared:Carbon dioxide
Measurement Principle:H2 gas
range:0~1000ppm
Number: 9389 9002
Mount sensor up to 100 ft. from transmitter
Minimum Detection Limit:5 ppb
Range:0-100 ppm
Minimum Detection Limit:100 ppb
Range>100 ppm
Minimum Detection Limit:0.5 ppb
Range:0-3` ppm
Minimum Detection Limit:1 ppb
Range:0-40 ppm
Minimum Detection Limit:20 ppb
Range>200 ppm
Minimum Detection Limit:100 ppb
Range>4,000 ppm
Minimum Detection Limit:500 ppb
Range>10,000 ppm
Fits a broad variety of existing Honeywell products such as:
System 57, Touchpoint Pro, XNX / Modbus, Midas / Modbus, SPM Flex
Remote visibility on gas detection and worker location
Analysis method: Continuous scan FT-IR analyzer
Gas cell path: 5.0 m path length
Scanning rate: ≤ 15 sec per point
Power requirements: 110 or 230 VAC
Operating temperature: 59° to 95°F
Operating humidity: 20-65% RH
monitoring system with up to 72 points of gas detection
One systems monitors up to 9 gas families
monitors more than 40 gases
H2S Range:0 -100 ppm
CO Range:0 - 300 ppm
O2 range:0 - 25% by vol
SO2 Range:0 -100 ppm
H2S Range:0-100 ppm
CO Range:0-1000 ppm
O2 range:0 -25% by vol
Combustible gases:0-100% LEL
H2S Range:0 -200 ppm
CO Range:0 - 2000 ppm
O2 range:0 -30% by vol
Rapid response to refrigerants including:
R-404a, R-22, R-507, R514A, R-134a
R-407a, R-410a, R-422d, NH3, CO2
HFO1234YF, HFO1234ZE, HFO1233ZD.
Ammonia or Fluorocarbon Monitoring
of Refrigeration System Vent Lines
Detects more than 35 gases error-free
mA loop or Modbus RTU output
Operating temperature: -40°C to +65°C, IP66, Type 4X
Choice of toxic, Oxygen or flammable sensors
tape-based gas detector for low-level toxics
detects the ultrasensitive gases including:
hydrides, mineral acids, oxidizers and amines
کنترل و اندازه گیری خطر گازهای سمی
مجهز به IP66/67
O2, CO, H2S, SO2, CO-H
Cl2, NH3, NO2, PH3, HCN sensors
