Sort by
Display
per page
Pressure Range:0-10000Psi or 700 bar
Pressure range 0 to 210 bar
Generates pressures to 1400 bar
Operational with a wide range of fluids
Acrylic reservoir for visibility of fluid level
Capability to measure temperatures:
-30 to +30 degrees centigrade
30 to 90 degrees Celsius
30 to 120 degrees Celsius
Wireless frequency: 433.92MHz
200m wireless transmit distance
Less than 1μA quiescent current
Testing Voltage:AC 230V±10% or AC 110V±10%
Frequency:50-60Hz
Detection as precise as 0.00046%
Five alarm levels and two sensitivity modes
One device protections up to 8,000 sq. feet
Measuring range
Ra: 0.05-10.0μ Rz: 0.1-50μ
Measuring range
Ra: 0.05-10.0μ Rz: 0.1-50μ
Measuring range
Ra: 0.025-12.5μ
Scanning Range:2.5mm~9999mm
Gain Range:0dB~110dB
Two scanning modes: A scan and B scan
Range: 0~199.9 Gu
Angle: Single 60 degrees
Ray types:α, ß, γ and X ray
Radiation dose rate : 0.01µSv/h - 1000µSv/h
Pulse dose rate : 0-4000cpm, 0-4000cps
Detection range: 0 ~1.500mg/L
Resolution:0.001mg/L
Accuracy:C<0.400 : ±0.020mg/L
Measuring range: ±10kPa
Accuracy: ±0.3%FSO
Measuring range: ±10kPa
Accuracy: ±0.3%FSO
Measuring range: ±350kPa
Accuracy: ±0.3%FSO
Refrigeration power: Qcmax 70.3W
Maximum temperature difference:60 C
Connects to PC via USB or Ethernet to download data
Easy setup with a network or USB drive
External Interface:1 USB port,1 Ethernet port
RS-485 Modbus communication interface.
3 DPDT relay outputs for added functionality
Easy chain installation RS-485
Fully compatible with the 301C controller
Power requirement: 17-24 VAC, 24-38 VDC, 250 mA
1.5mm diameter holes
at 20%, 40%, 60% and 80% of thickness.
Tolerance of 0.0004 inch
1.5mm diameter holes
at 20%, 40%, 60% and 80% of thickness.
Tolerance of 0.0004 inch
Ultrasonic Calibration Blocks
Clibration Block for flaw detector
thickness gauge test block
Ultrasonic Calibration Blocks
Clibration Block for flaw detector
thickness gauge test block
مطابقت با استاندارد ATSM E 2491
ضخامت 25 mm
Range:0-1500µm
accuracy:±1% or ±1µm
Range:5-80mm
diameter:12mm
Frequency:5MHz
Frequency:2MHZ,4MHz
Angles;45,60,70
Range:1.2-225mm
diameter:10mm
Frequency:5MHz
Range:0.75-60mm
diameter:6mm
Frequency:7MHz
Range:0-1500µm
accuracy:±1% or ±1µm
Range:1.2-225mm
diameter:10mm
Frequency:5MHz
Frequency:2MHZ,4MHz,6MHz
diameter:10mm,20mm
یک عدد بلوک از جنس فولاد کربنی ST37
دارای عیوب بسیار ظریف سطحی و زیرسطحی، برای تست DC و AC
یک عدد بلوک آلومینیومی ۱۰ در ۲۰ سانت و ضخامت ۱ سانت
دارای عیوب متعدد برای تست PT
جنس بلوک : فولاد ضد زنگ
روش جوشکاری : کلیه روش های قوسی
Ultrasonic Calibration Blocks
Clibration Block for flaw detector
thickness gauge test block
Shims thicknesses from 12.5μm to 20mm
Cable for Ultrasonic Flaw detector
BNC Lemo Connector
4-20mA outputs for up to 8 transmitters
Averaging/minimum/maximum reading
for up to 16 transmitters
Transformer ratio up to
3000A/5A or 600A/1A Max 40 °C
Max. load 15 VA
Number of modules 2
Max. load 40 VA
Number of modules 3
Max. load 60 VA
Output voltage 24 V AC
Max. load 63 VA
Mounting DIN-rail
Number of modules 6
Max. load 75 VA
Output voltage 24 V AC
Display
Active field 56×28 mm
Resolution 128×64 pixels
for operating up to 150 controllers
from the Synco™ 700
via Konnex bus
VKF41 different models:
VKF41.40,VKF41.50,VKF41.65,VKF41.80
VKF41.100,VKF41.120,VKF41.150,VKF41.200
VKF46 different models:
VKF46.40,VKF46.50,VKF46.65,VKF46.80
VKF46.100,VKF46.125,VKF46.150,VKF46.200
VKF46.250,VKF46.300,VKF46,350
VKF46.400,VKF46.450,VKF46.500,VKF46.600
VVF40 different models:
VVF40.15,VF40.25,VF40.40,VF40.50
VVF40.65,VVF40.80,VVF40.100,VVF40.125,VVF40.150
VVF41 different models:
VVF41.49,VF41.50,VF41.65,VF41.80
VVF41.90,VVF41.91,VVF41.92
VVG41 different models:
VVG41.11,VVG41.12,VVG41.13,VVG41.14,VVG41.15,
,VVG41.20,VVG41.25,VVG41,32,VVG41.40,VVG41.50
VVG44 different models:
VVG44.15,VVG44.20,VVG44.25
VVG44.32,VVG44.40
VVI46 different models:
VVI46.15,VVI46.20,VVI46.25
VDN1 different models:
VDN110,VDN115,VDN120
VEN1 different models:
VEN110,VEN115,VEN120
VXF40 different models:
VXF40.15,VXF40.25,VXF40.40,VXF40.50
VXF40.65,VXF40.80,VXF40.100,VXF40.125,VXF40.150
VXG41 different models:
VXG41.15,VXG41.20,VXG41.25,VVG41,32,VXG41.40,VXG41.50
VXG44 different models:
VXG44.15,VXG44.20,VXG44.25,VVG44,32,VXG44.40,VXG44.50
VXI46 different models:
VXI46.15,VXI46.20,VXI46.25
SKB different models:
SKB32,SKB82,SKB62,SKB60
SKC different models:
SKC32,SKC82,SKC62,SKC60
SKD different models:
SKD32,SKD82,SKD62,SKD60
Torque and speed 4 Nm and 5 Nm
Quarter turn, 90°
